|
|
 |
|
Works with ACC1000
Door Controller
$1,350.00
|
Biometric
Fingerprint Proximity Card Reader
This proximity access card reader is coupled with a biometric
fingerprint sensor for extra security. Maximum distance is approx. 15cm
(5.9 inches).
- Large capacity of fingerprints
- Use standalone mode or with PC connection
- Short response time
- Backup recognition mode for pool fingerprints, password or ID card
- High recognition rate
- Master card range assignable
- Card capacity up to 10,000 users
- One RS-485 port supported for networking
- Supports fingerprint database download and upload
- Built-in watchdog to prevent the system from halting
- External reader port 26/34 bit Wiegand format for Anti-pass-back
- Alarm function available (Tamper, Force Entrance, Door Open
Too Long)
- Keypad locks for 30 seconds, while continuous error operation
- Universal serial port supported for LED display, printer,
lift controller, ETC
- Can be used with ACC1000 panel |
|
|
Works with ACC1000
Door Controller
$212.00
|
Weatherproof
Proximity Card Reader
This weatherproof proximity card reader is a perfect
access control device for outside doors in factories, office buildings,
and other sensitive areas. Maximum distance is approx. 18cm (7 inches).
Constructed of tough ABS plastic.
-
Big and clear LCD display with 4 line text display (1024x64 Graphic)
- Unlimited site codes
- 11 sets of Time Zones
- Different time zone for each user
- Set up to 120 holiday schedules
- Auto-show work status (Set Via Time Zone Edit)
- Master cards range assignable
- RS-485 port supported for networking (Via Controller or Directly)
- Built-in door sensor and arming inputs (On/Off)
- Auto open & close scheduling of doors
- Control mode, card capacity and card type assignable by user directly
- Built-in proximity reader and external wiegand reader port
- Auto-discriminating between stand-alone & networking system
- Alarm function available (Tamper, Force Entrance, Door Sense)
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K, 13.56M (Mifare)
or 2.4G reader
- RF Frequency / Reading range: 125KHz / 10-18cm
- Door relay: 2A/12 VDC N.O./N.C./COM 0.1~600 sec. Latch type
- Alarm relay: 2A/12VDC N.O./N.C./(Jumper) 0~600 sec. (COM Common)
- DI Input: Egress button / door sensor / arming switch
- Transistor output: Arming / door sensor / card sensor
- Tamper switch Limit switch (Form C)
- Serial port: Supported for AI-401R016, LED display, relay board,
printer ETC. (4800, N, 8, 1)
- Material: ABS
- Dimensions: 127(L) x 91(W) x 46(H)mm
- Can be used with
ACC1000 panel
- Computer hookup device
CN550 |
|
|
Works with ACC1000
Door Controller
$139.00
|
Dual Tech
Network Proximity Card Reader
This proximity card reader is a perfect
access control device for inside doors in any sensitive area. Maximum
distance is approx. 15cm (5.9 inches). Constructed of tough ABS plastic.
- 12 numeric keypad, 1 bicolor LED (Green
and Red) and buzzer indicator)
- 11 sets of time code
- 120 holiday schedules
- Keypad will lock for 30 second after continuous error operation
- Built-in watchdog to prevent system halting
- Support door relay auto-relock function
- RS-485 port supported for networking (Via Controller or Directly)
- Built-in reader and additional reader support port for exit or
anti-pass-back function
- Control mode, card capacity and card type assignable by user directly
- RF frequency/Reading range: 125KHz/about 15cm
- Networking: RS-485, 9600, N, 8, 1
- External reader port: Suitable for all WG, ABA reader, 125K 13.56
(Mifare) or 2.4G reader
- Door relay: 2A/12 VDC N.O./N.C./COM 0.1~60 sec. Latch type
- Alarm relay: Transistor output/Serial output (Selective)
- Tamper switch: External AR-401R016
- Serial port: Limit switch (Form C)
- Material: ABS - Dimensions: 112(L) x 76(W) x 25(H)mm
- Can be used with
ACC1000 panel |
|
|
$409.00
|
Long Range Reader
This long range proximity access card reader
is made of sturdy ABS plastic and can read a card from a distance of up
to 60cm (23.6 inches) in optimum conditions.
-
Depends on tags 33~60cm
- WG 26/34, ABA II, ASYNC 9600, N, 8, 1
- Material: ABS
- Power: 9~18 VDC
- Current: <4w
- Dimensions: 230(L) x 230(W) x 35(H)mm
- ECL-ACC220A proximity card (includes 2 pieces)
|
|
|
$79.00
|
Outdoor Wiegand Proximity Card Reader
This Wiegand proximity access card reader is easy to install and is
perfect for outside. Maximum distance is approx. 8cm (3.5 inches).
Constructed of tough ABS plastic.
- Wiegand proximity card
reader
- Simple installation
- Standalone or network operation
- Sealed for outdoor use
- Up to 1,024 users
- Low profile design
- Network interface: WG 26/34, ABAII, ASYNC 9600, N, 8, 1
- Available ports: tamper switch, Wiegand port
- Card users: card only: 65,536 (1,024 with card and pin combination)
- Anti-pass back: multi-door when used with ACC1000
- Wiegand port: 1 (WG26, WG34)
- Indicators: bicolor LED (green, red) and buzzer
- Remote operation: supported (using ACC1000)
- Reader range 8cm
- Request to exit supported
- DI inputs: egress button, door contact, arming switch
- Environment: suitable for outdoor use
- Construction: ABS body
- Voltage: 9-18 VDC variable auto detection
- Current draw 1 watt
- Temperature/Humidity: -10 deg. C -50 deg. C/0-90% Rh max
- Dimensions: 80 (L) x 43(W) 15 (H)mm |
|
|
